Ryobi ONE+ 18V Cordless 6-Tool Combo Kit

Overview

The Ryobi P1819 is a 6-tool cordless combo kit that includes a drill/driver, impact driver, circular saw, reciprocating saw, oscillating multi-tool, and an LED work light. It ships with a 1.5Ah and a 4.0Ah battery plus a charger. The whole thing costs about what a single Milwaukee M18 FUEL or DeWalt XR tool costs with a battery kit.

Amazon reviewers give it 4.7 stars across 2,040+ ratings. A YouTube reviewer who used the kit daily for 5 years as an apartment maintenance tech said every tool except the circular saw survived heavy use. SlashGear calculated the individual tool retail values and found the kit offers roughly 46% savings over buying each tool separately. Bob Vila called it a "must-buy for new homeowners."

This is a homeowner kit. Every tool uses a brushed motor, and the circular saw has a 5-1/2 inch blade instead of the standard 7-1/4 inch. If you're a professional, look elsewhere. If you're building out your first tool collection for home projects, this is the most cost-effective way to start.

Key Features

The impact driver is the standout tool in the kit. It delivers 1,800 in-lbs of torque, which is surprisingly close to pro-grade drivers. A YouTube contractor with 40 years of experience drove a 6-inch timber lock screw without issues and called the impact driver "the most impressive" tool in the set.

The drill/driver has a 1/2-inch keyless chuck, 24-position clutch, and two speed ranges (0-450 and 0-1,750 RPM). At 500 in-lbs of max torque, it handles drywall screws, pilot holes, and general drilling without complaint.

The circular saw cuts up to 1-9/16 inches deep at 90 degrees with its 5-1/2 inch blade. That's enough for 1-by lumber and plywood but not enough for a 2x4 at 45 degrees. Every competitor at this price (DeWalt, Milwaukee, Craftsman) includes a 6-1/2 inch blade.

The reciprocating saw does 3,400 strokes per minute with a 1-inch stroke length. The oscillating multi-tool runs 10,000 to 20,000 OPM but requires an Allen wrench for blade changes. The LED light puts out about 160 lumens.

All six tools run on Ryobi's ONE+ 18V platform, compatible with 300+ tools. That ecosystem is the real long-term value.

Performance

The impact driver and drill handle everyday tasks well. Amazon reviewers report driving lag screws, building fences, framing sheds, and assembling furniture. One owner used the kit for two full house remodels over two years and said everything "handled it all with ease."

The circular saw is adequate for trim, plywood, and 1-by material. The 40-year contractor on YouTube said "it rips better than a Porter Cable little saw" but noted it "don't quite have the power that DeWalt does." The brushed motor means it bogs down faster under load than brushless alternatives.

Battery life varies by tool. The 4.0Ah battery runs the drill and impact driver for hours. The reciprocating saw and circular saw drain it much faster. Multiple Reddit users and Amazon reviewers recommend buying extra 4.0Ah or 6.0Ah batteries early, especially if you use the saws frequently.

The apartment maintenance tech who used the kit for 5 years had one failure: the brushed circular saw died after about a year of heavy daily use. He replaced it with the brushless version. Everything else survived.

Build Quality & Design

These are plastic-bodied tools with brushed motors. They vibrate more than Milwaukee or DeWalt during extended use. The oscillating multi-tool in particular has "pretty bad vibration" according to the contractor reviewer. Ergonomics are middling. r/tools users note you "can't get a really great grip" on the handles.

Durability is fine for weekend use but limited for daily professional work. The YouTube maintenance tech warned "they're only going to survive a couple of drops, if that" compared to Milwaukee or DeWalt tools "that can last a decade." Reddit users report 3-5 years of reliable service with occasional use.

Ryobi backs the kit with a 3-year limited warranty. One quirk: the included Phillips bit and drill bits are poor quality. Replace them immediately with a decent bit set.

Value for Money

The math is simple. A Milwaukee M18 FUEL 5-tool combo kit costs about four times as much. A DeWalt 6-tool kit costs about twice as much. The Craftsman V20 6-tool kit is the closest competitor at a similar price but has a smaller ecosystem and lower torque specs.

What you give up for the savings: brushless motors, metal housings, toolless blade changes on the oscillating tool, and a full-size circular saw blade. If you'll use these tools every weekend for years, the upgraded DeWalt or Milwaukee may be worth it. If you need tools for occasional projects, the Ryobi does the job.

The 300+ tool ONE+ ecosystem is Ryobi's biggest long-term advantage. You can add a leaf blower, a brad nailer, a jigsaw, or a rotary tool without buying new batteries. No other platform at this price has that kind of range.

Who Should Buy This

First-time homeowners who need a starter tool collection. Six tools plus two batteries gets you ready for most home repairs and projects immediately.

Budget-conscious DIYers who want cordless convenience without the cost of a pro kit. The Ryobi gets 90% of the work done at a fraction of the price.

Anyone who values ecosystem flexibility. If you plan to add more tools over time (and you will), the ONE+ platform has more options than any other budget system.

Who Should Skip This

Professional tradespeople. The brushed motors, plastic housings, and limited durability are not built for jobsite abuse. Milwaukee M18 FUEL or DeWalt XR are the right tools for daily professional use.

Anyone who needs a serious circular saw. The 5-1/2 inch blade is the kit's weakest point. If you're cutting 2x4s regularly, buy the Ryobi brushless 7-1/4 inch saw separately or step up to a DeWalt or Milwaukee kit.

Buyers who already own DeWalt or Milwaukee batteries. Switching ecosystems to save money on one kit doesn't make sense if you already have batteries and chargers in another platform.