WORX Pegasus 2-in-1 Folding Work Table WX051

Overview

The WORX Pegasus WX051 is a folding work table that doubles as a sawhorse. It sets up in seconds, folds flat for storage, and weighs just 30 pounds. Bob Vila named it "Best Overall" portable workbench after testing over half a dozen competitors, and it holds a 4.8-star rating across more than 14,000 Amazon reviews.

The concept is simple: open it up and the two ABS plastic wings lock into position to form a 31 x 25-inch work surface at 32 inches high. Fold the wings down and you have a sawhorse rated for 1,000 pounds. WORX includes two quick clamps and four clamp dogs in the box, plus rubber linking straps so you can connect multiple tables together.

Key Features

The Pegasus arrives fully assembled. There is nothing to bolt together or figure out. You pull it out of the box, unfold the legs, flip up the wings, and you are working. That alone separates it from competitors like the BLACK+DECKER Workmate, which requires tools and comes with instructions that multiple reviewers have called confusing.

The work surface has a built-in ruler along both edges and small recessed trays molded into the top for screws, nails, and small hardware. Bench dog holes are spaced across the surface so you can position the four included clamp dogs to hold irregularly shaped pieces. The two quick clamps slide into T-tracks along the table edges and can grip material up to about 18 inches wide.

In sawhorse mode, indentation wells on the top help hold a standard 2x4 in place while you cut. A storage shelf sits between the legs for a power strip or hand tools. And if you need a bigger work surface, the included linking straps let you connect two or three Pegasus tables side by side.

Performance

As a work surface for typical DIY tasks, the Pegasus is solid. Users on r/woodworking report using it for everything from cutting deck boards to assembling furniture to holding a miter saw stand. One Amazon reviewer described using it daily on job sites for four months straight with 50-pound boxes of screws stacked on it, and it held up without complaint.

The 300-pound table capacity handles most home workshop tasks. In sawhorse mode, the 1,000-pound rating means you can support serious lumber. One reviewer on r/Workbenches liked it enough to buy a second one so they could double their workspace by linking two together.

Where the Pegasus falls short is clamping. The included quick clamps work, but they do not grip with the force of a proper bar clamp. One long-term Amazon reviewer noted after a year of use that the clamps "hold things, just not real securely" and would not trust them for tasks requiring tight clamping pressure. A comparison video by a YouTube reviewer found that the Pony Jorgensen 60P's included clamps were noticeably better, though that table costs noticeably more on average.

The clamps also have a learning curve. You have to squeeze the handle and place each clamp into small recesses on the table edge to lock them in position. It takes a few tries to get the motion down, and Bob Vila's review specifically called this the trickiest aspect of the whole table.

Build Quality & Design

The Pegasus is built from molded ABS plastic with steel supports running through the legs. It is lighter and less rigid than an all-steel workbench, and that is a deliberate trade-off. At 30 pounds, you can tuck it under one arm and carry it across a job site. Folded, it is just 5.5 inches thick and stores flat against a wall or behind a door.

The plastic surface will bow slightly if you load it with heavy, long boards. Multiple eBay reviewers and Walmart reviewers have noted this. It is not enough to make the table unusable, but if you regularly work with 8-foot hardwood planks, you will notice some flex. The bottom storage shelf has the same limitation. Several reviewers warn against loading it up, since the shelf connects with plastic clips that could break under strain.

On the positive side, the table's safety features are well-designed. The tabletop folds down slowly after the clips are released to prevent finger pinching. Non-slip feet keep it stable on concrete, wood floors, or grass. And the locking mechanisms are solid enough that Best Buy reviewers noted it is very hard to accidentally collapse the table while working on it.

Long-term durability reports are encouraging. Users with multiple years of ownership say the Pegasus still works and looks like new. One 71-year-old Amazon reviewer has been using hers for deck repair and woodworking projects with no structural issues. WORX backs it with a 3-year warranty.

Value for Money

The Pegasus sits in the mid-range for portable workbenches. The BLACK+DECKER Workmate costs about a third as much but is harder to set up, has no sawhorse mode, and cannot link to other tables. The Pony Jorgensen 60P has better clamps, adjustable height, aluminum legs, and a 500-pound table capacity, but typically costs significantly more.

For the price, you get a workbench that arrives ready to use, converts between two modes, includes clamps and clamp dogs, and folds flat for storage. That is a lot of functionality in a single product. The ToolGuyd community notes it is a solid upgrade over the classic B&D Workmate design, even if it costs more.

If you need serious clamping force, plan to budget for a set of aftermarket bar clamps. The included ones will hold materials in place for light work, but you will want better clamps for glue-ups or aggressive cutting.

Who Should Buy This

The Pegasus is ideal for DIYers and hobbyists who need a portable work surface that stores flat. If you work in a garage, apartment, or small workshop where a permanent workbench is not practical, this table fills that role well. Contractors who move between job sites will appreciate the 30-second setup time and 30-pound weight.

It is also a strong choice as a secondary workbench. Woodworkers on r/woodworking use it alongside their primary bench for tasks like supporting long boards, holding a miter saw, or providing an extra assembly surface when needed.

Who Should Skip This

If you need a workbench with strong clamping pressure built in, the Pony Jorgensen 60P or a Kreg Mobile Project Center will serve you better. If you regularly work with heavy hardwood and need a table that will not flex under load, a steel-frame workbench is the better investment.

Tall users should also take note. The fixed 32-inch height cannot be adjusted, while the Pony Jorgensen goes from 25 to 35 inches. If you are over six feet tall and find yourself hunching over standard-height work surfaces, the lack of height adjustment could be a deal-breaker.